Normally, asphalt mixing plants work on asphalt, but if concrete is mixed into it, how should we control the equipment? Let the editor briefly explain to you how to control the asphalt mixing plant under special circumstances.

Any kind of mechanical equipment must go through precise design, testing and other processes before it can be manufactured, and the same is true for asphalt mixing stations. According to the survey, the following stages are necessary for any asphalt mixing plant.

There are two main modification channels for emulsified bitumen equipment: external mixing method and internal mixing method. The external mixing method is to first make ordinary emulsified bitumen plant, then add polymer latex modifiers to the ordinary Shanxi emulsified bitumen equipment, and mix and stir to prepare.

There are two main types of modification methods for container-type bitumen emulsion plant: external mixing method and internal mixing method.

Working principle of thermal oil heating bitumen device
A local heater is installed in the storage tank, which is suitable for bitumen storage and heating in transportation and municipal systems. It uses organic heat carrier (heat-conducting oil) as the heat transfer medium, coal, gas or oil-fired furnace as the heat source, and forced circulation by the hot oil pump to heat the bitumen to the use temperature.

The output of bitumen decanter is 6-10t/h. It adopts an automatic telescopic sealed container structure. The barrel loading method is to lift the asphalt barrel by an electric hoist and place it on the guide rail at the entrance. The hydraulic propeller forward button is activated to push the barrel into the barrel removal device. (Push and slide into the barrel), the hydraulic cylinder stroke is 1300mm, and the maximum pushing force is 7.5 tons. The bitumen decanter has beautiful appearance, reasonable and compact arrangement, and stable performance, and is suitable for production under various industrial and mining conditions.