It is one of the required equipment for thermoplastic road line marking job, is often referred as thermoplastic paint boiler, kneader or Hot Melt kettle and so on, is mainly used for melting thermoplastic road marking paint. The quality and performance of Pre-heater often determines the construction efficiency of hot-melt road marking and the melting quality of marking paint. To choose the right pre-heater will be your first important step of doing thermoplastic road marking job well.

Asphalt mixing station equipment plays a very important role in the road construction industry. The equipment will produce waste gas and dust and other public hazards during the production process. In order to ensure that the environment is not affected, the manufacturer needs to take relevant measures to control these hazards. This article will briefly introduce the methods for dust hazard control in asphalt mixing equipment.

People pay more and more attention to urban construction, and the use of asphalt is increasing. The application rate of asphalt mixing station is naturally growing rapidly.

Emulsified asphalt equipment can now be seen in major projects. So what are the main secrets of the equipment's wide application? Let's explain in detail:

When the fully automatic asphalt spreader uses a fixed blowtorch to heat the fire tube of the asphalt tank, the chimney on the asphalt tank should be opened first, and the blowtorch can be ignited only after the liquid asphalt submerges the fire tube. When the flame of the heating blowtorch is too large or spreads, the ratio blowtorch should be changed first, and the excess fuel should be burned out before use.

The slurry sealer is mainly used to deal with road surface friction loss, cracks, rutting and other defects to improve the road surface's anti-skid and waterproof properties, improve the road surface flatness and driving comfort, and thus achieve the effect of "returning old to new". This equipment can be widely used in the construction process of ordinary slurry seal, modified slurry seal and micro-surfacing.